Kabelberekening KABEL++ is a cablecalculationprogram that calculates powercable-sizes. The ease of use was the goal when the software was designed: The user simply inputs the motoraxispower and the software fully calculates the cablesize and selectivity. So no need to choose for the safetysize, nor to scroll in a cablesizetable to match the output: The software all does the job. As well as the safety, the crosssectiona as the selectivity are fully calculated.

The calculation program is suitable for the Windows XP/Vista/7 environment.
There are two versions: a Light version and an Advanced version both in English, German and Dutch language

Goal of the program
The goal of thee program is to calculate the variation in power, cable length, voltage, frequency, layout etc. of an electric cable connected to a motor or static load, while maintaining the maximum amount of user-friendliness and clarity.

Kabelberekening The program is intended for use in the calculation of cables and transformer installations in an industrial environment. The main issues involve the thermic load, voltage loss and short-circuit calculations, so that the user encounters no further problems.

After the purchase of one licence, the program may be used within an office network (multi-licence) without additional costs. The software does not require a dongle or suchlike.

More info
Kabel++ has been on the market since 1991, and is now available in version 5.62 (67000 lines of softwarecode)
The relevant norms are BS7671 17e ed (Requirements for electrical installations) and IEC60364. This also indirectly apply to cable construction norms such as BS5467 for XLPE cable. Further applicable NEC NFPA 70 ANSI).

('IEC 60364 Electrical Installations for Buildings is the International Electrotechnical Commission's international standard on electrical installations of buildings. This standard is an attempt to harmonize national wiring standards in an IEC standard. The latest versions
of many European wiring regulations (e.g., BS 7671 in the UK, UNE-20435 in Spain) follow the section structure of IEC 60364 very closely, but contain additional language to cater for historic national practice and to simplify field use and determination of compliance by electrical tradesmen and inspectors') . For benath the equator AS/NZS 3008.1.1:2009 and Wiring Rules AS/NZS3000:2007 fullfills.